# Sample configuration file for ISC dhcpd
# option definitions common to all supported networks…
option domain-name “example.org”; (“linuxsc.net”)
option domain-name-servers ns1.example.org, ns2.example.org; (148.243.214.10)
default-lease-time 600;
max-lease-time 7200;
# if you do not use dynamical DNS updates:
#
# this statement is needed by dhcpd-3 needs at least this statement.
# you have to delete it for dhcpd-2, because it does not know it.
#
# if you want to use dynamical DNS updates, you should first read
# read /usr/share/doc/packages/dhcp-server/DDNS-howto.txt
#dns-update-style ad-hoc;
#dns-update-style interim; (default)
#ignore client-updates;
ddns-update-style none;
ddns-updates off;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;
#no authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;
# Share network declaration (for adminitration of networks)
share-network linuxsc1 {
default-lease-time 600;
max-lease-time 7200;
option subnet-mask 255.255.255.0;
option routers 10.21.1.2; (gw de la red o el firewall como gw)
subnet 10.21.1.0 netmask 255.255.255.0 {
option broadcast-address 10.21.1.255;
option routers 10.21.1.2;
# Group Declaration
group servidores {
use-host-decl-names on;
# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
host perseo.linuxsc.net {
hardware ethernet 00:89:6b:e3:ac:ff;
fixed-address 10.21.1.232;
}
host pruebas.linuxsc.net {
hardware ethernet 00:98:7a:e5:f1;
fixed-address 10.21.1.233;
}
host apex {
option host-name “apex.example.com”;
hardware ethernet 00:A0:78:8E:9E:AA;
fixed-address 192.168.1.4;
}
}
group otros {
range 10.21.1.234 10.21.1.240;
}
}
# This is a very basic subnet declaration.
subnet 10.254.239.0 netmask 255.255.255.224 {
range 10.254.239.10 10.254.239.20;
option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
}
# A slightly different configuration for an internal subnet.
subnet 10.5.5.0 netmask 255.255.255.224 {
range 10.5.5.26 10.5.5.30;
option domain-name-servers ns1.internal.example.org;
option domain-name “internal.example.org”;
option routers 10.5.5.1;
option broadcast-address 10.5.5.31;
default-lease-time 600;
max-lease-time 7200;
host hacker {
hardware ethernet cc:34:25:ac:e5:66;
deny booting;
}
}
}